Saturday, February 20, 2016

Fuel Goes In Here

So having fitted a very basic cab interior to the main body casting of Skorloey (which I really should start referring to as TR No.1) I've made a start on adding some more details to the boiler backhead. The first item to be added was the firebox door, and it's probably going to take me longer to write this post than it did to make the thing.


I made a very basic template on the computer to give me the right sized oval with two pieces of strapping. This was printed out, stuck to a sheet of 0.12mm brass and then cut out and filed to shape. The point of a small round file was then used to gently punch some rivets into the strapping. The only other item required was a bit of 0.45mm brass wire to act as the hinge. Assembly then simply involved smearing some solder paste on the rear of the strapping and then folding the strapping around the wire and over the door. A quick touch from a soldering iron and everything was fixed solid and could be tided up.


The finished door then had some more solder paste smeared on the back, it was positioned on the backhead and another brief use of the soldering iron fixed it in place. A quick clean up with a file and fibreglass pen and the job was done. As with the rest of the cab details it might not hold up well under close scrutiny but when glimpsed through the door of the cab past he legs of the driver or fireman it should give the right impression.

1 comment:

  1. It is looking good and half the battle is estimating how much work is required. This looks about right to me.

    ReplyDelete